User`s manual

ESC y -
The SELECT CHARACTER SET command allows the user to
select the font that would permit
the desired characters per inch.
the greatest legibility with
To select
the desired character set first determine which of the
character set fonts would be best suited for the document and the
pitch selected.
Table 1 shows the set-up string format.
Table 1
ASCII code:
ESC y n1 n2
Decimal:
027 121 n1 n2
Hexidecimal:
79 nl n2
The variables n1 and n2 designate the specific font selection.
The variable n1 specifies the font locations as follows:
0
= Internal fonts
1
= IC Card fonts
2
= Downloaded fonts
The variable n2 represents
the particular
font in the selected
location.
Table 2 shows the internal fonts available in the GQ-3500.
Table 2
I
No. Name
Orientation
CPI Point Size
0 Courier 10
Portrait
10 10
1
Courier 10
Landscape
10 10
2 EDP 13 Portrait 13
7
3
EDP 13
13 7
4 Modern 10 PS
Landscape
Portrait
--
10
5 Ext. Graphics
Portrait
10 12
6
Ext. Graphics
Landscape
10 12
LOTUS l-2-3 accepts printer set-up codes
in decimal
the codes
in EXAMPLE 1
form. Using
below will select EDP 13, the smallest
font internal to the GQ-3500.
EXAMPLE 1:
EDP 13:
\027\121\000\003
PRINTING SPREADSHEETS WITH THE GQ-3500
PAGE 2