User`s manual

EPSON
EPSON AMERICA INC.
SERVICE DEPARTMENT
PRODUCT
SUPPORT
BULLETIN
DATE: 7/21/87
P-0009
SUBJECT:
GQ-3500
VERSION M0231 FIRMWARE GRAPHICS
When printing
graphics on the GQ-3500 with the new firmware
upgrade, (M0231), in the LQ-1500 emulation, it is necessary to
disable dip switch 1-6 on the interface board.
This will discard
characters when the print position moves beyond the right margin.
The Interface comes from the factory with this switch enabled.
Shown below is a print out from P.C. Paint ver. 2.0 with dip
switch 1-6 enabled and disabled using the LQ-1500 emulation.
Figure 3 is a table of dip switch 1 settings.
Figure (1)
Figure (2)
(1-6 enabled)
(1-6 disabled)