User`s manual

SECTION I.
To begin
the creation of
the
GQ-3500 File
Table the
installation of DisplayWrite 4 must be completed. In the PRINTER
SELECTION menu, select item "10. OTHER PRINTER" and enter GQ3500.
Refer to the DW4 users 'manual for specifics.
If the program
installation has already been completed proceed to SECTION II.
SECTION II.
Upon completing the installation and accessing
of DisplayWrite 4 please follow these steps to access the create
a working copy
file table:
NOTE
. i
.
SOME FUNCTIONS REQUIRE A TEST TO BE RUN AFTER
ENTERING VALUES, THE RESPONSE TO EACH OF THESE
SHOULD BE "Y" REGARDLESS OF THE TEST RESULTS.
1) From the Main Menu, Select "9. Profiles.'
2) From the Profiles Menu, Select "6 Create Table."
3) From the Printer Function Table TasksDepressR."
4) From the Revise Printer Function Table Selection, Enter
Table Name -- "GQ3500."
5) From the Revise Printer Function Table
(see figure
below for
an example) we are ready to CREATE the control codes.
Create Printer Function Table
I 1. Initialization and Reset
I 2. Vertical/Horizontal Spacing
I 3. Highlighting
I 4. Paper/Page Options
I 5. Typestyles/Character Sets
I 6. User-defined Controls
I 7. Function Selection Tests
has
We will start with Il. and proceed down the menu. If a section
been omitted it is to be left in the default setting.
Ml
Initialization and Reset
Start of Document Initialization
Control Sequence:
[
(blank)
End of Document Reset:
Control Sequence:
[
(blank)