User`s manual

ESC W
Turn Double-wide Mode On/Off
Format:
ASCII code:
ESC W
n
D&Id:
27
87
n
Hexadecimal: 1B 57
n
Comments:
Double-wide mode doubles the width of all characters and spaces. The
following values can be used for n:
1: Mode is turned ON.
0: Mode is turned OFF.
ESC w
Turn Double-hiph Mode On/Off
Format:
ASCII code:
ESC w
n
Decimal:
27 119 n
Hexadecimal: 1B 77
n
Comments:
Double-high mode doubles the height of all characters. The following
values can be used for n:
1: Mode is turned ON.
0: Mode is turned OFF.
ESC2
Set Char&r Magnification
Format:
ASCII code:
ESC z
nl
n2
Decimal:
27 122 nl n2
Hexadecimal: 1B 7A nl
n2
Comments:
gets the horizontal and vertical character magnification, which is
specified independently for each direction. The value of nl specifies
the horizontal character magnification (character width); the value of
n2 specifies the vertical character magnification (character height).
The following values can be used for nl and IQ:
1: Normal width or height
2: Double-wide or double-high
3: Triple-wide or triple-high
Does not change line spacing.
Page Printer Commands A-23