User`s manual

ESCv
Format:
ASCII code:
ESC y
nl
Decimal:
27
121 nl
Hexadecimal: 1B 79
nl
Select Character Set
n2
n2
n2
Comments:
Selects a character set specified by nl and i-12 as shown in the following
table. If nl and n2 are outside the given ranges, or character sets that
are not available are specified, the command is ignored.
It will also be
ignored if the specified character set does not match the current page
orientation.
Table A-l. Character sets
nl n2 Gharacter set group
0 oto7
Internal character set
1 oto15' IC card character set
2 0 to 7+*
Download character set
* If you are using two font cards, the fonts in the card in the A slot are
numbered 0 -X, and the numbering of the fonts in the B slot begins with
x+1.
*+ To select a download character set with this command, subtract 1
from the download font number. For example, to select download font 2,
specify font 1.
ESC t Turn Extended Graphics Mode On/Off
Format:
ASCII code: ESC t
n
Decimal:
27
116 n
Hexadecimal: 1B 74
n
Comments:
The extended graphics font includes a range of character graphics.
When you turn on the extended graphics font, the font that is the
closest size to the font that you are using is selected. The following
values can be used for n:
1: Mode is turned ON.
0: Mode is turned OFF.
-
A-18
Page Printer Commands