User`s manual

ESC C
Set Page Length in Lines
Format:
ASCII code: ESC C
n
Decimal: 27 67 n
Hexadecimal: 1B 43 n
Comments:
Sets the page length to n lines in the current line spacing. The value of
n must be from 1 - 127. After the printer receives this command, the
current print position becomes the top line of the page. This command is
ignored if the current line spacing is 0. This comman
d must be at the
beginning of a line.
ESC C0
Format:
ASCII code:
ESC C
Decimal:
27 67
Hexadecimal: 1B 43
Set Page Lerwth in Inches
NUL n
0
n
00 n
colnments:
Sets the page length to n inches. The value of n must be from 1 - 22.
After the printer receives this command, the current print position
becomes the top line of the page. This comman
d must be at the
beginning of a line.
Line feeding
Format:
ASCIIccde: LF
Decimal:
10
Hexadecimal: OA
commentsz
Moves the current print position down one line and to the left margin.
The line spacing can be set with ESC 0, ESC 2, ESC A, or ESC 3. See also
=q*
Page Printer Commands
A-9