User`s manual

The following commands are affected by this command:
ESC (
ESC )
ESC.
ESC v
ESC _
ESC I
ESC $
ESC \
ESC,
ESC 3
ESC J
ESC +
ALLOCATE
CIRCLE
PAlNT
LINE
Data Control
CR
Format:
ASCII code: CR
Decimal:
13
Hexadecimal: OD
Carriage Return
Comments:
Returns the print position (the position at which the next character is
printed) to the left margin. A line feed will be added if DIP switch l-5
is ON.
Vertical Motion
Form feeding
FF
Format:
ASClI code: FF
Decimal:
12
Hexadecimal: OC
Form Feed
-.
Comments:
Prints the data in the print buffer, then moves the print position to the
left margin at the beginning of the next page.
In other words, this code
starts a new page.
With DIP switch l-7 ON, the form feed operation takes place
automatically when the data exceeds the page length even if no FF
code is received.
With DIP switch l-7 OFF, the data exceeding the page length is
discarded until an FF code is received.
A-8
Page Printer Commands