User`s manual

DC3
Format:
ASCII code:
DC3
Decimal:
19
Hexadecimal: 13
Deselect Printer
Comments:
Switches the printer to the deselected state. In this state, the printer
ignores input data until it receives code DCl.
The printer cannot be
reselected with the ON LINE button.
ESC EM
Format:
ASCII code:
ESC EM n
Decimal: 27
25
n
Hexadecimal: 1 E3
19
n
Select Inwt Pauer Tray
Comments:
The following values can be used for n:
1: Selects standard tray.
2: Selects other tray.
All values of n except those listed above are ignored. If the printer is
not equipped with an option tray, the command is ignored. This
command must be specified at the beginning of a page; otherwise, it is
ignored.
Beeper
BEL
Format:
ASCII code:
BEL
Decimal:
7
Hexadecimal: 07
Beeper
Comments:
Sounds the printer’s beeper for 0.2 second. This code can be enabled or
disabled by changing the setting of DIP switch l-8.
-
A-6
Page Printer Commands