User`s manual

Appendix C
DIP Switches
The GQ-3500 has three groups of DIP (Dual In-line Package)
switches that control printer functions. These switches are on the
interface board and can be accessed by removing the interface board
from the back of the printer.
(See Chapter 2 for instructions and fuller
explanations of DIP switch functions.)
DIP switches 1 and 2 determine the printer’s initial (default)
settings. Although you can override many of these settings from the
control panel or with software commands, the defaults remain the
same. Whenever you turn on the printer, the printer is set to the
default settings.
DIP switch 3 is used with optional IC Cards.
If you use an optional
IC card, the functions of switch 3 will be described in the instructions
that came with the IC card.
There are also one or two DIP switches on the outside of the
interface card. These switches control the functions of the interface
itself and are discussed in the sections on the interfaces.
The following tables list the switches and their functions.
DIP Switches C-1