User`s manual

JI
J2
10
11
PF
PB
PU
FFB
Ul
u2
Paper transport jam. Open the printer and lift the
processing unit. Gently remove the jammed paper, then
lower and lock the unit into place. Close the case and
resume printing when the printer has warmed up.
Paper exit jam. See instructions for paper transport jam.
Buffer overflow; overflow characters will not be printed.
Press the ERROR CLEAR button.
Page composition error; some characters may be lost. Press
the ERROR CLEAR button.
When the printer is off line and the DATA light is
flashing, the printer prints the received data when the
PAPER FEED button is pressed. This status message is
displayed while the printer is printing in this way.
Paper out. See Chapter 4 for details on adding paper.
Paper size being used does not match paper size selected.
Change the setting or change the paper to make the
setting and paper size match.
Toner out. Change the toner cartridge. (See Chapter 5 for
more details.)
Collector unit and lens shield should be replaced.
Replace the collector unit and lens shield. Press the reset
lever before closing the cover. (See Chapter 5 for
complete details.)
Drum cartridge and lens shield should be replaced.
Remove the drum cartridge, and clean the transfer
charger with the cleaning blade. Next, replace the drum
cartridge. Then change the lens shield. Press the reset
lever before closing the cover. (See Chapter 5 for
complete details.)
Directory of Status Messages
B-3