User`s manual

User-defined Characters
Note: Characters are 3/5 the size of those defined for an LQ-1500
printer.
ESCgr
Define User-defined Characters
Format:
ASCII code: ESC &
NUL dl d2 . . . dn
Decimal: 27 38 0 dl d2 . . . dn
Hexadecimal: 1B 26 00 dl d2 . . . dn
Comments:
This command allows characters to be redefined in the currently
selected mode.
ESC :
Copy ROM into RAM
Format:
ASCII code: ESC :
NUL
NUL
NUL
Decimal:
27 58 0
0 0
Hexadecimal:
1B 3A 00
00 00
Comments:
This code copies the characters in the ROM into RAM so that specific
characters can be redefined.
ESC %
Select User-defined Set
Format:
ASCII code:
ESC %
n
Decimal: 27 37 n
Hexadecimal: 1B 25 n
Comments:
ESC & is required to define the character set. The following values can
be used for n:
0: Selects the normal set.
1: Selects the user-defined set.
LQ Emulation Commands
A-51