User`s manual

Horizontal tabbing
HT
Format:
ASCII code: HT
Decimal:
9
Hexadecimal: 09
Horizontal Tab
Comments:
Advances the print position to the next horizontal tab setting. The
default settings are at intervals of eight characters in the default
pitch, and tab positions are not affected by subsequent changes in
character pitch.
ESC D
Format:
ASCII code:
ESC D
Decimal: 27
68
Hexadecimal: 1B 44
nl
nl
nl
Set Horizontal Tabs
n2 . . . NUL
n2 . . . 0
n2 . . . 00
Comments:
This command allows setting of up to 32 horizontal tabs, which are
entered as nl, n2, n3, etc. (from 1 - 255) with the 0 character terminating
the command. The tab settings must be entered in ascending order.
ESC D 0 clears all tabs. The settings on power up or after an ESC @
command are every eight characters. The tab settings do not change if
the character pitch is changed, and for proportional printing the size of
10 pitch characters determines the tab positions.
Overall Printing Style
ESC x
Select Letter Oualitv or Normal
Format:
ASCII code:
ESC x n
Decimal:
27
120 n
Hexadecimal: 1B 78 n
Comments:
The following values can be used for n:
0: Selects the normal mode.
1: Selects the Letter Quality (LQ) mode.
The actual appearance of the printing does not change.
A-44
LQ Emulation Commands