User`s manual

ESC +
Format:
ASCII code:
ESC
Decimal:
27
i3
n
n
Hexadecimal: 1B 28 n
Move Base Line
Comments:
Shifts the character base line from the standard base line position. To
find n, calculate the displacement required in units of the minimum
increment specified by ESC q. The displacement must be from 0 - 127. If
the base line is to be moved up, subtract the displacement from 256. If
the amount of base line movement exceeds the current line spacing the
command is ignored.
ESC u
Format:
ASCII code: ESC u
n
Decimal: 27 117 n
Hexadecimal: 1B 75
n
Character AliPnment
-
Comments:
The following values can be used for n:
0: Base line alignment
1: Cell top edge alignment
2: Cell bottom edge alignment
3: Character center alignment
4: Cell center alignment
The position of a character is determined according to the position of
the preceding character.
-
A-26
Page Printer Commands