Instruction manual
Table Of Contents
- Front Matter
- Contents
- Introduction
- Chapter 1: Setting Up the Printer
- Chapter 2: Using Paper and Other Media
- Chapter 3: Printing with EPSON Drivers for Macintosh
- Chapter 4: Printing with EPSON Drivers for Windows
- Chapter 5: Maintaining and Transporting the Printer
- Chapter 6: Resolving Problems
- Appendix A: Specifications
- Index
2-21
Using Paper and Other Media | 2-21
4. Pull the paper set lever out, to the released position. Then open the
lower cover. (The cover has tabs that support the posterboard.)
5. Feed the posterboard into the paper slot until it meets resistance.
6. Align the board with the scale on the roll paper cover.
Note
If you’re using stock
more than 39 inches
long, load it long edge
first (in landscape
orientation).