Instruction manual

2-13
Using Paper and Other Media | 2-13
4. Press the
Paper Source
button to select either
Roll Auto Cut
or
Roll
Cutter Off
.
•
Choose
Roll Auto Cut
if you want the paper to be cut automatically
after each page is printed.
•
Choose
Roll Cutter Off
if you’re printing on canvas, vinyl, or other
heavy media (see list below). Media that is too thick may damage
the cutter. Also choose this setting if you’re using the optional auto
take-up reel, or if you want to print a series of pages and keep them
together for later cutting.
Always select
Roll Cutter Off
if you’re printing with one of these
EPSON media:
When done printing, cut the paper manually using scissors or the
optional Manual Media Cutting System (see page 2 for ordering
information).
•
Enhanced Matte Posterboard
•
Smooth Fine Art Paper
•
Posterboard Semigloss
•
Textured Fine Art Paper
•
Velvet Fine Art Paper
•
Adhesive Vinyl
•
Somerset Velvet for EPSON
Fine Art Paper
•
Canvas
Note
To avoid feeding excess
paper, make sure you
don’t select Sheet when
you’re using roll paper.