Instruction manual
Table Of Contents
- Front Matter
- Contents
- Introduction
- Chapter 1: Setting Up the Printer
- Chapter 2: Using Paper and Other Media
- Chapter 3: Printing with EPSON Drivers for Macintosh
- Chapter 4: Printing with EPSON Drivers for Windows
- Chapter 5: Maintaining and Transporting the Printer
- Chapter 6: Resolving Problems
- Appendix A: Specifications
- Index
1-51
Setting Up the Printer | 1-51
5. Select
Local Port
, then click
New Port
. The following dialog box
appears:
6. In the text box, type the appropriate information for your system using
the syntax below, then click
OK
:
\\name of computer connected to the printer\name of the shared printer
7. In the Printer Ports dialog box, click
Close
.
8. On the Ports screen, make sure the new port is added and its checkbox is
selected. Then click
OK
.
Before printing, be sure to test the printer as described in the following
sections and perform any needed adjustments:
•
Run a nozzle check from the control panel, as described on page 5-4.
•
Perform a print head alignment, as described on page 1-39.