Instruction manual
Table Of Contents
- Front Matter
- Contents
- Introduction
- Chapter 1: Setting Up the Printer
- Chapter 2: Using Paper and Other Media
- Chapter 3: Printing with EPSON Drivers for Macintosh
- Chapter 4: Printing with EPSON Drivers for Windows
- Chapter 5: Maintaining and Transporting the Printer
- Chapter 6: Resolving Problems
- Appendix A: Specifications
- Index
1-37
Setting Up the Printer | 1-37
You see the Utility menu:
4. Click the
Nozzle
Check
button, then click
Print
to print a nozzle check
pattern.
5. Examine the printed pattern. It should be complete, with no gaps or
missing dots, as shown below; in addition, all the dots should be in place
and not deflected. (You may need to use an eye loupe to check the
pattern.)
6. If the pattern is complete, click
Finish
and close the Utility menu, then
continue on to “Aligning the Print Head” on page 1-39.
Click to run a
nozzle check