Instruction manual
Table Of Contents
- Front Matter
- Contents
- Introduction
- Chapter 1: Setting Up the Printer
- Chapter 2: Using Paper and Other Media
- Chapter 3: Printing with EPSON Drivers for Macintosh
- Chapter 4: Printing with EPSON Drivers for Windows
- Chapter 5: Maintaining and Transporting the Printer
- Chapter 6: Resolving Problems
- Appendix A: Specifications
- Index
1-22
1-22 | Setting Up the Printer
Connecting to the USB Port
To connect the printer to a USB port, you need a standard shielded USB
cable. Follow the steps below to connect the printer to your computer:
1. Make sure both the printer and your computer are turned off.
2. Connect the end of the USB cable to the USB port on the back
of your printer.
3. Connect the end of the USB cable to your computer’s USB
port or a first tier USB hub port.
When done, continue with the instructions on page 1-26.
Note
If the printer doesn’t
work when you attach
it to a first tier USB hub
port, connect it directly
to the USB port on
your computer.