Instruction manual

5-25
Maintaining and Transporting the Printer | 5-25
5. If you’re removing the printer from its stand, first make sure the casters
on the leg assembly are locked and the two stabilizer knobs are touching
the floor.
6. Remove the two wing nuts securing the printer to the stand (underneath
the printer). Keep them in a safe place.
7. With four people, lift the printer using the hand grips located at the four
corners of the printer. (See the stickers located near the rear hand grips
for the correct holding position.)
8. Keep the printer level while moving it.
caster lock
stabilizer knob
Warning
The printer is very heavy.
Always have four people lift
it, using the hand grip areas
as shown.