Instruction manual
Table Of Contents
- Front Matter
- Contents
- Introduction
- Chapter 1: Setting Up the Printer
- Chapter 2: Using Paper and Other Media
- Chapter 3: Printing with EPSON Drivers for Macintosh
- Chapter 4: Printing with EPSON Drivers for Windows
- Chapter 5: Maintaining and Transporting the Printer
- Chapter 6: Resolving Problems
- Appendix A: Specifications
- Index
5-22
5-22 | Maintaining and Transporting the Printer
6. Slowly take your finger off
the side pin, then remove the
cutter blade. Be careful not
to lose the spring.
7. Insert the new cutter.
8. Push down on the cutter’s side pin while turning the latch to the left.
9. Close the lower cover. The print head returns to the home position.
Note
Be careful not to let the
cutter or the spring coil
pop out of the casing.