Instruction manual
Table Of Contents
- Front Matter
- Contents
- Introduction
- Chapter 1: Setting Up the Printer
- Chapter 2: Using Paper and Other Media
- Chapter 3: Printing with EPSON Drivers for Macintosh
- Chapter 4: Printing with EPSON Drivers for Windows
- Chapter 5: Maintaining and Transporting the Printer
- Chapter 6: Resolving Problems
- Appendix A: Specifications
- Index
5-18
5-18 | Maintaining and Transporting the Printer
7. When you see the message
INSERT BK INK
on the control panel, insert
the new (replacement) black ink cartridge. Then close the ink
compartment cover.
You see a message on the control panel indicating the progress of the
black ink charging. When done,
K: EPSON GENUINE INK
is
displayed.
Continue on to the next section to update your printer driver software.
Updating the Driver
Once you have switched black ink modes, you need to update the driver
(printer software) so that it knows which black ink mode you’re using.
Follow these steps:
Macintosh Users
1. Open the Chooser from the
Apple
menu.
2. Click the printer icon and port, as shown.
3. Close the Chooser. This completes the black ink replacement.
Caution
Be careful not to reinstall
the old black ink cartridge.
Click
here . . .
then here
Close when done