Instruction manual

3-3
Printing with EPSON Drivers for Macintosh | 3-3
3. Select the type of paper you loaded (
Roll Paper
or
Sheet
) from the
Paper Source
list.
If your image is more than 90.5 inches long, select
Roll Paper
(Banner)
. You can also use this setting to print a series of continuous
images without any “margin space” between them.
4. If you’re using roll paper, you can set the following options:
• Auto Rotate
Saves paper if your document length is shorter than the printable
width of the paper roll. Your image is rotated automatically by
90 degrees and printed crosswise.
• Auto Cut
Choose this option if you want the paper to be cut automatically
after each page is printed (not available for thicker media types).
• Print Page Line
Prints trim lines on the right and bottom edges of your pages.
• Save Roll Paper
Saves paper by not feeding the blank portion of the last page of your
document. Available only when you’ve selected
Roll Paper
(Banner)
as the Paper Source.
5. Make the settings you want for
Orientation
,
Reduce or Enlarge
, and
Printable Area
(available when
Paper Source
is set to
Sheet
).
6. After making your settings, click
OK
.
Note
These settings override
settings made through
the control panel.
Note
Select Landscape only
if you want to rotate your
image 90°.