Specifications

Chapter 2

Loading Rear-Feed, Continuous Forms

- Do not position the left edge of the paper more than 1/2 from the end of the platen. The

paper must cover the groove in the left side of the platen; if it doesnt, the printer will signal

a paper out alarm. There are reference marks on the printer to show the recommended left

edge position for the two most common paper sizes.

Make sure the paper lever is forward, and open the access cover and rear cover to expose the

tractors (1). Pull the lock levers (2) forward and slide the left tractor into position for the paper

size you're using. Slide the right tractor to fit the paper width. Push the levers back to lock them.

Loading Rear-Feed, Continuous Forms

- Check the Addendum (

) for details on paper specifications.

Open the tractor covers (3).

Pull the paper through the opening between the printer and the rear cover and

place the first two sprocket holes on each side of the page over the pins (4).

ML 320/321 ( 96-02-01 )