Specifications

turn the printer on again. Enter the Menu Mode and reset this item to Full Operation.
Page Length
Choose the length of the paper youre using.
Page Width (Model 321)
Choose 8 for letter-size paper.
Paper Out Override
Senses when less than one inch of paper remains and stops printing. Choose Yes to override
the detector. Be careful: this feature can cause loss of data and damage the printhead.
Pitch
Choose character width measured in characters per inch (cpi), or proportionally spaced
characters (Epson/IBM only).
Print Mode
Choose the NLQ (Near Letter Quality) Courier or Sans Serif font, Utility for quicker printing,
or DRAFT for fastest printing.
Print Registration
Use this with bidirectional bit image graphics to improve registration.
Print Suppress Effective
If your system uses the DC1 and DC3 codes for something other than the print suppress
mode, choose No.
Printable DEL Code
Choose NO if you don't want to print the DEL code (dec 127) as a solid box.
Proportional Spacing (Microline Standard)
Choose Yes for proportionally spaced printing.
Reset Inhibit
Choose Yes to prevent your software from resetting the printers settings.
Size
Choose Double for double width and height printing.
Skip Over Perforation
Choose Yes if you want the printer to go to the next page when it comes within 1 of the
bottom. Keep it set to No if your software has its own page formatting controls.
Style
Choose Normal (upright) or Italics (slanted).
Zero Character (Epson/IBM)
Choose Slashed when its important to distinguish between a zero and a capital letter O.
For MICROLINE Standard Model, see Language Set.
ML 320/321 ( 96-02-01 )