Specifications

Explanation of Menu Items

7 or 8 Bit Graphics (Microline Standard)

Choose graphics your system uses: 7 or 8 dots in each column printed.

7 or 8 Bit Data Word (Microline Standard)

If your system uses seven bits to make up each unit of data, choose 7.

Auto CR (IBM):

Choose Yes to have the printer automatically add a Carriage Return to each Line Feed command

it receives.

Auto Feed XT (Epson)

If your system uses pin 14 of the parallel interface to control automatic line feed, select Valid.

Auto LF:

If your printout is consistently double spaced, select No; if it overprints, choose Yes.

Character Set (IBM/Epson):

Choose IBM Character Set I or Set II.

Character Set (Microline Standard)

Choose Line Graphics for IBM Character Set I, Block Graphics for graphic characters, or DLL for

printing custom characters designed on your computer and downloaded to the printer.

CPU Compensation

Choose Special if you have difficulty interacting with your computer through the parallel interface.

Cut Sheet Page Length

Choose the length of the single sheet paper youre using.

Form Tear-Off

Choose 500 ms to turn this feature on.

Graphics

Choose Uni-directional (left to right only) for better graphics print registration at slower

speed.

Language Set

These sets replace certain symbols with special characters used in the respective foreign

languages. The Microline Standard menu also includes American Slashed Zero and American

Unslashed Zero.

Line Spacing

Choose 6 or 8 lines per inch.

Max Receive Buffer

Choose Full to use the maximum receive buffer memory. Choose 1 line to limit the receive

buffer to one line of data.

Operator Panel Functions

Choose Limited Operation to deactivate the PRINT QUALITY, CHARACTER PITCH, and

MODE buttons on the control panel.

Note: To reactivate the menu, turn off the printer, then hold down the MODE button and

ML 320/321 ( 96-02-01 )