Specifications

Menu Mode

When the printer is in Menu mode, the MENU indicator lights, and the functions shown below

the buttons are active this lets you customize the default settings from the control panel. The

selections you make on the menu are stored in the printers permanent memory.

Note: You can override features set on the menu using either the front panel or commands sent

from your computer. However, when you turn off the printer, features set by those methods will

be cancelled.

Double Click >>> (

) for a listing of the menu for Epson/IBM mode.

Double Click >>> (

) for a listing of the menu for Microline/Standard..

Entering Menu Mode

To enter Menu mode, make sure the printer has ribbon and paper. then press

MODE

The SEL light goes out, the MENU light goes on. Press

GROUP

, and the first line of the menu

prints:

Font

Print Mode

Utility

GROUP of related items ITEM within the group Current SETting for the item

For example (Epson/IBM model), to change to NLQ Courier printing, press

SET

This line: Font Print Mode Utility

changes to this: Font Print Mode NLQ Courier

Same GROUP Same ITEM New SETTING

Exiting the Menu Mode

When youve made the changes you want, press

MODE

to record the changes and return to

Print mode. (MENU light goes out.)

Note: To restore the menu to its original factory settings, turn the printer off. Then hold down

the

SEL

and

MODE

buttons while you turn it on again.

ML 320/321 ( 96-02-01 )