Specifications

If your paper keeps jamming

, bits of paper are probably stuck in the paper path.

Turn off the printer, and use the platen knob to back the paper out of the printer.

Open the access cover and the rear cover (1).

Fold some continuous-feed paper over three times to produce a page four sheets thick

and load it onto the tractors.

Turn the platen knob to draw the paper around the platen (2) this will bring jammed pieces of

paper up and out so you can remove them -- then back it out again.

Reload regular paper. Close the rear cover and the access cover (3).

Turn the printer on and press the

FORM FEED

button.

ML 320/321 ( 96-02-01 )