Specifications

Loading Single Sheets

Note: If you already have continuous form paper in the printer, tear off any printed pages,

then press the PARK button to back it out of the paper path. The

ALARM

light will go on

and the

SEL

light will go off.

Push the paper lever back (1).

Push the guide wire back (2).

Raise the separator to its upright position (3).

Set a sheet of paper on the separator and adjust the guides so that they're barely

touching the edges of the paper. Pull the bail lever forward. The paper will

automatically feed into the printer. (Theres a reference mark on the separator for

the left paper edge.)

Push the bail back (4) and adjust the top of form.

ML 320/321 ( 96-02-01 )