User`s manual

1-3
1-2 System Composition
The following illustration shows the system composition of @E.Terminal for MC 5.7 inch.
RS-232C or RS-485
FALDIC ALPHA5
FALDIC ALPHA5
FALDIC ALPHA5
USB-A
Screen editor
"V-SFT-5"
(V5.4.2.0 or later)
SX bus
MJ1/MJ2
USB-B
MJ1/MJ2
External PG
(only No. 1 axis)
[No. 1 axis]
SX bus station No.: "201"
[No. 2 axis]
SX bus station No.: "202"
[No. 4 axis]
SX bus station No.: "204"
"V-CP"
Up to 4 servos and I/O terminals each
can be connected.
SX bus station No.: "221"
SX bus station No.: "224"
I/O terminal
Input 8 points/
Output 8 points
(NR1SW-16T65DT)
I/O terminal
Input 8 points/
Output 8 points
(NR1SW-16T65DT)
Starting up signal etc.
RDY etc.
Programming support tool
SX-Programmer Standard
"NP4H-SWN" (V2.3.5.1 or later)
SX-Programmer Expert (D300win)
"NP4H-SEDBV3" (V3.4.4.0 or later)
PLC/general purpose
computer
@E.Terminal for MC
"NW0H-CNV + NW0H-CA3"
or
commercially available USB cable
USB CF card Recorder
“USB-CFREC”
Note1) SX bus station No. which users can add is 1 to 200.
Note2) Connectable servo amplifier
FALDIC ALPHA5 (RYT*** 5-VS )