Setup guide

Installing the Software | 15
Installing the Software
You can use USB and/or Ethernet network connections.
For USB connection, make sure your system has the appropriate port and that you have a standard,
shielded cable, 10 feet (3 m) or less.
Note: Do not connect the printer until a software installation screen prompts you to.
To connect to a network hub, or directly to your computer’s network interface, you need a standard RJ-45
CAT-6 network cable.
USB Installation
1. Power off your printer, then connect the USB cable to the printer and your computer.
2. Insert the CD into your computer.