Operation Manual

4. Set the printing area by specifying the inner diameter and the outer diameter, and then press Proceed.
Note:
You can set 114 to 120 mm as the outer diameter, and 18 to 46 mm as the inner diameter in 1 mm increments.
5. Select Print on a CD/DVD.
Note:
To make a test print, select Test print on A4 paper, and then load A4 plain paper in the paper cassette 2. You can check
the printout image before printing on a CD/DVD label.
6. A message is displayed on the screen telling you that the printer is getting ready. You are then instructed to
load a CD/DVD. Press
d to check the instructions and load a CD/DVD.
7. Press Ready, a message is displayed telling you that the printer is ready, and then press OK.
8. Select color copy or monochrome copy.
9.
Change the other settings if needed.
Note:
Press Preview to view the scanned image. You can adjust the printing position on the preview screen.
10. Press the x button.
11. When printing has
nished,
the CD/DVD tray is ejected. Remove the tray from the printer, and then press
OK.
12. Remove the CD/DVD and store the CD/DVD tray on the bottom of the printer.
Related Information
& “Placing Originals on the Scanner Glass” on page 35
& “Loading a CD/DVD” on page 39
& “Menu Options for Copy to CD/DVD” on page 85
& “Removing a CD/DVD” on page 42
Menu Options for Copy to CD/DVD
Outer, Inner
Specify the print range. Up to 120 mm for the outer diameter, and a minimum of 18 mm for the inner
diameter can be specied. Depending on the setting, the CD/DVD or CD/DVD tray may get dirty. Set
the range to t the printable area of your CD/DVD.
Print Type (Print on a CD/DVD or Test print on A4 paper)
Select whether to print on a CD/DVD or make a test print on A4 size plain paper. When you select Te s t
print on A4 paper, you can check the print result before printing on a CD/DVD.
Preview
Start scanning the original and displays the scanned image. You can adjust the printing position on the
preview screen.
Color
User's Guide
Copying
85