Operation Manual

Lights Came On and then Went Out
e printer's voltage may not match the outlet rating. Turn o the printer and unplug it immediately. en check
the label on the printer.
!
Caution:
If the voltage does not match, DO NOT PLUG YOUR PRINTER BACK IN. Contact your dealer.
Power Does Not Turn
O
Hold down the P button for a little longer. If you still cannot turn o the printer, unplug the power cord. To
prevent the print head from drying out, turn the printer back on and turn it
o
by pressing the
P button.
LCD Screen Gets Dark
e printer is in sleep mode. Press anywhere on the LCD screen to return it to its former state.
The Auto Power On Feature does not Work
❏ Make sure that the Auto Power On setting in Setup mode has been enabled.
❏ Make sure that the printer is properly connected with a USB cable or to a network.
Related Information
& “Menu Options for Printer Setup” on page 113
Cannot Print from a Computer
❏ Install the printer driver.
❏ Connect the USB cable securely to the printer and the computer.
❏ If you are using a USB hub, try to connect the printer directly to the computer.
❏ If you cannot print over a network, see the Network Guide.
❏ If you are printing a large data size image, the computer may run out of memory. Print the image at a lower
resolution or a smaller size.
User's Guide
Solving Problems
141