Operation Manual

Note:
❏ Depending on the settings on this printer and the digital camera, some combinations of paper type, size, and layout may
not be supported.
❏ Some of the settings on your digital camera may not be reflected in the output.
Printing using a wireless connection
You can print photos directly from a digital camera using a wireless connection.
Make sure your digital camera can connect to a network and is PictBridge capable (DPS over IP).
For more details, see the documentation provided with your camera.
A
You can check the network connection status of your products.
& “Setup Mode” on page 95
B
Load photo paper in the paper cassette.
& “Into the paper cassette” on page 24
C
Enter Setup mode from the Home menu.
D
Enter External Device Setup. Scroll down if necessary.
E
Select Print Settings.
F
Make the appropriate print settings. Scroll down if necessary.
G
Configure the camera’s network connection. The procedure depends on your camera. For more details, see the
documentation provided with your camera.
Note:
❏ You can check the Printer Name that is connected to the network.
& “Setup Mode” on page 95
❏ Connect the camera to the same network as the product.
H
Print the photo from the camera.
Note:
You cannot print photos or documents from other devices while the camera is connected to the product.
I
Disconnect the camera from the network.
User’s Guide
Printing
44