Operation Manual

Note:
❏ Leave enough space in front of the product for the paper to be fully ejected.
❏ Do not remove or insert the paper cassette while the product is operating.
Into the rear paper feed slot
Note:
Even though you can print on paper with a thickness of 0.05 to 0.6 mm, some hard paper may not be fed correctly even if the
thickness is within this range.
A
Send your print job to the product (from your computer, or by using the control panel).
Note:
Before sending your print job, you cannot load paper into the rear paper feed slot.
B
Open the rear paper feed slot cover.
C
Slide out the paper support, and then extend and tilt it backwards.
User’s Guide
Paper and Media Handling
30