Operation Manual
Thumbnail Preview Does Not Work Properly
See the EPSON Scan help.
Scanning Is Too Slow
Lower the resolution.
Related Information
& “Scan Mode” on page 17
Scanning Stops when Scanning to PDF/Multi-TIFF
❏ When scanning large volumes, we recommend scanning in grayscale.
❏ Increase the free space on the computer's hard disk. Scanning may stop if there is not enough free space.
❏ Try scanning at a lower resolution. Scanning stops if the total data size reaches the limit.
Related Information
& “Scan Mode” on page 17
Other Problems
Slight Electric Shock when Touching the Printer
If many peripherals are connected to the computer, you may feel a slight electric shock when touching the printer.
Install a ground wire to the computer that is connected to the printer.
Operation Sounds Are Loud
If operations sounds are too loud, enable quiet mode. However, this may slow down printer operations.
❏ Wi n d o w s
Enable Quiet Mode on the Main tab in the printer driver.
❏ Mac OS X
Select System Preferences from the
menu > Printers & Scanners (or Print & Scan, Print & Fax), and then
select the printer. Click Options & Supplies > Options (or Driver). Select On as the Quiet Mode setting.
Quiet Mode is only eective when you select plain papers as the Media Type setting and Normal as the Print
Quality setting in the Print Settings menu.
❏ EPSON Scan
Select a mode other than Full Auto Mode, click Conguration, and then set Quiet Mode on the Other tab.
Cannot Save the Data to a Memory Card
❏ Use a memory card which is supported by the printer.
User's Guide
Solving Problems
104