User`s guide

Troubleshooting Page 52
A system error has
occurred.
An error condition may have caused your application or the TWAIN
source to stop working correctly. Save any documents in process, close
any open applications, and exit Windows. Restart Windows, then start
your application and try again.
Sometimes an error condition may cause the computer to display a
message telling you that your scanner is not recognized. If this happens,
reset your scanner by pushing the RESET button. Then restart your
computer and try again.
Windows has detected
new hardware.
If you are using Windows 95 or 98, its hardware detection utility may not
have correctly detected the SCSI controller. Restart Windows and see
the Windows Help utility for instructions on detecting new hardware.
Problem Solution