Operation Manual

Setting Up the Start Button 3-1
Chapter 3
Setting Up the Start Button
Overview of Start Button Features
When your scanner is connected directly to your computer, you
can set up the scanner’s
Start button to operate in the following
ways:
❏ Open an application of your choice
(for Windows Millennium Edition, 98, and 2000 users only)
❏ Scan and send the scanned document to a specified
application
(if you have installed Presto! PageManager for EPSON from
the scanner software CD-ROM)
Note:
If you are using your scanner over a network, you cannot use the
scanner’s
Start button in the ways described above.
If you are using Windows Millennium Edition, 98, or 2000, read
“Making Windows Millennium Edition, 98, and 2000 Settings” on
page 3-2 first.
If you are using Windows 95 or NT 4.0, or a Macintosh computer,
read “Making PageManager Settings” on page 3-4.