Specifications

EPSON Expression 1600
1/00 EPSON Expression 1600
- 6
Don’t use the following paper types:
transparencies, tracing paper, coated paper
(such as photo quality and glossy paper), labels,
multipart forms, carbon paper, or paper with
staples, holes, rips, curls, or folds.
Optional IEEE 1394 FireWire
®
Scanner
Interface Card (B808342)
General
Interface type IEEE 1394-1995 compatible
Data transfer
method Half-duplex Data/Strobe differential serial
Synchronization
method Clock synchronization with DS-Link
Encoding/
decoding DS-Link
Logic level 3.3 V
Power class Power class code 100
No power supply from external sources
Fitted with a repeat function with bus
power
Compatible
connectors IEEE 1394-1995 compatible
Lights and Buttons
The scanner has two indicator lights and two buttons. Light
status and button functions are described in the tables below.
N = on, O = off, F = flashing
N = on, O = off, F = flashing
Operate buttonERROR light READY light Start button
Scanner indicator lights
Light Light status Color Scanner status
READY
N
Green Ready to scan images
F (flashing)
Green Scanning in progress
ERROR
N
F (rapidly flashing)
Red An error has occurred
Scanner buttons
Button Function
P
Operate Turns the scanner on and off.
]
Start
Automatically launches a
]
Start button-compatible
application. You must set up your scanner software
and a compatible application to use this feature with
any application other than Presto! PageManager.
If you installed Presto! PageManager, it’s
automatically assigned to the
]
Start button. You can
set up Presto! PageManager to scan your image
automatically and send it directly to another application
or a peripheral device, such as a printer.
Error conditions
ERROR light READY light Error type
N N
Command error: The scanner has
received incorrect commands from
the scanning software. Try rescanning.
F O
Interface error: Make sure the scanner
is securely connected to the
computer, and then turn the scanner
off and back on again.
F F
Fatal error: Make sure the
transportation lock is released, and
then turn the scanner off and back on
again.
O O
Option error: There’s a problem with
the TPU or ADF unit. Make sure the
TPU or ADF is flat against the
document table. Make sure your
option is securely connected to the
OPTION connector at the back of the
scanner. Finally, make sure the ADF
isn’t out of paper and doesn’t have a
paper jam.