Specifications
EPSON Expression 1600
1/00 EPSON Expression 1600
- 4
SCSI Interface
Interface type ANSI X3T9.2/375R Revision 10L
(SCSI 2)
Functions BUS FREE phase
ARBITRATION phase
SELECTION/RESELECTION phase
COMMAND phase
(the Logical Unit Number is fixed at 0
and the Command Link Function
is not supported)
DATA phase
DATA IN phase
DATA OUT phase
STATUS phase
MESSAGE phase
MESSAGE IN phase
MESSAGE OUT phase
ATTENTION condition
RESET condition
Logic level TTL compatible
Electrical standard ANSI X3T9.2/375R Revision 10L
(SCSI-2)
ID Setting Selectable from 0 to 7 (factory setting: 2);
asterisk (*) setting is only used when
transporting scanner
Terminator Internal terminator selectable (enable/
disable)
Connector type Two Micro DB-50 connectors
Connector pin arrangement
USB Interface
Interface type Universal Serial Bus Specification
Revision 1.0
Electrical standard Full speed mode (12MB) of Universal
Serial Bus Specification Revision 1.0
Connector type One receptacle (Type B)
Option Interface Connector
Interface type For use with the optional automatic
document feeder (B813162) or
transparency unit (B813182)
Output voltage 21.6 to 26.4 VDC
4.75 to 5.25 VDC
Output current 0.6 A (24 V)
0.3 A (5 V)
Initialization methods
SCSI Scanner is turned on or receives a SCSI
Reset signal from the SCSI interface
(hardware initialization).
Scanner receives a SCSI Bus Device
message or an Esc @ command from the
software (software initialization)
USB Scanner is turned on or USB cable is
unplugged from the USB port on the
scanner (hardware initialization)
Scanner receives a Bus Reset from the
USB interface, or an Esc @ command
from the software (software initialization)
Optional Transparency Unit (B813182)
The transparency unit allows you to scan positive and negative
transparent materials—35 mm slides, 35 mm filmstrips, and
film or documents up to 8.5 × 11.7 inches in size. In addition
to four film guides, it comes with a reflective document mat
that allows you to alternate between scanning transparent
materials and normal reflective (paper) documents.
General
Dimensions Width: 12.8 inches (324 mm)
Depth: 21.3 inches (540 mm)
Height: 3.6 inches (92 mm)
Weight 11 lb (5 kg)
Maximum
read area 8.5 × 11.7 inches (216 × 297 mm)
Reliability MCBF 100,000 cycles
25
50
1
26