Operation Manual

Item Description
Print Start Timing Select options to start printing the faxes to receive.
❏ All Pages Received: Printing starts after receiving all of the pages. To start printing from the
rst page or last page depends on the setting of Collation Stack feature. See the
explanation for Collation Stack.
❏ First Page Received: Starts printing when the rst page is received, and then prints in order
as the pages are received. If the printer cannot start printing, such as when it is printing other
jobs, the printer starts printing received pages as a batch when it is available.
Collation Stack Since the rst page is printed last (output to the top), the printed documents are stacked in the
correct page order. When the printer is running low on memory, this feature may not be
available.
Print Suspend Time
❏ Print Suspend Time: During the time period you specied from Time to Stop through Tim e
to Restart you specied,, the printer saves documents received in the printer's memory
without printing them. This feature can be used for noise prevention at night or to prevent
condential documents from being disclosed while you are away. Before using this feature,
make sure there is enough free memory. When you set this to O, you can print the received
documents even before the restart time.
❏ Time to Stop: Stops printing documents.
❏ Time to Restart: Restarts printing documents automatically.
Quiet Mode Reduces the noise the printer makes when printing faxes, however, print speed may be reduced.
Report Settings Menu
You can nd the menu on the printer's control panel below:
Settings > General Settings > Fax Settings > Report Settings
Item Description
Fax Log Auto Print
Prints the fax log automatically. Select On(Every 30) to print a log every time 30 fax jobs are
completed. Select On(Time) to print the log at a specied time. However, if the number of fax
jobs exceeds 30, the log is printed before the specied time.
Attach Fax image to
report
Prints a Transmission Report with an image of the rst page of the sent document. Select
On(Large Image) to print the upper part of the page without reducing. Select On(Small
Image) to print the entire page reducing it to t onto the report.
Report Format
Selects a format for fax reports in Fax > More tab > Fax Report other than Protocol Trace.
Select Detail to print with error codes.
Basic Settings Menu
You can nd the menu on the printer's control panel below:
Settings > General Settings > Fax Settings > Basic Settings
Item Description
Fax Speed
Select the fax transmission speed. We recommend selecting Slow(9,600bps) when a
communication error occurs frequently, when sending/receiving a fax to/from abroad, or when
you are using an IP (VoIP) phone service.
User's Guide
Fax Settings
90