Operation Manual

& “Sending Faxes Dialing from the External Phone Device” on page 140
& “Removing Jammed Paper” on page 192
Sent Fax Quality Is Poor
❏ Clean the scanner glass.
❏ Clean the ADF.
❏ Change the Density setting on the control panel.
❏ If you are not sure about the capabilities of the recipient fax machine, enable the Direct Send feature or select
Fine as the Resolution setting.
❏ Enable the ECM setting on the control panel.
Related Information
&
“Fax Settings” on page 147
&
“Basic Settings Menu” on page 90
& “Cleaning the Scanner Glass” on page 176
& “Cleaning the ADF” on page 174
Faxes Are Sent at the Wrong Size
❏ When sending a fax using the scanner glass, place the original correctly aligning its corner with the origin mark.
Select your original size on the control panel.
❏ Clean the scanner glass and the document cover. If there is dust or stains on the glass, the scanning area may
extend to include the dust or stains, resulting in the wrong scanning position or small images.
Related Information
& “Fax Settings” on page 147
& “Placing Originals” on page 61
& “Cleaning the Scanner Glass” on page 176
Received Fax Quality Is Poor
❏ Enable the ECM setting on the control panel.
❏ Contact the sender and ask them to send using a higher quality mode.
❏ Reprint the received fax. Select Fax >
> Reprint Faxes to reprint the fax.
Related Information
& “Basic Settings Menu” on page 90
User's Guide
Solving Problems
225