Operation Manual
11. Click OK.
12. Remove the Ethernet cable connected to the computer and the printer.
13.
If you disabled IEEE802.3az for the computer in step 2, enable it.
14. Connect the Ethernet cables that you removed in step 1 to the computer and the printer.
If the problem still occurs, devices other than the printer may be causing the problem.
Cannot Print from an iPhone or iPad
❏ Connect the iPhone or iPad to the same network (SSID) as the printer.
❏ Enable Paper Setup Auto Display in the following menus.
Settings > General Settings > Printer Settings > Paper Source Settings > Paper Setup Auto Display
❏ Enable the AirPrint setting on Web Cong.
Related Information
&
“Connecting to a Smart Device” on page 24
&
“Application for
Conguring
Printer Operations (Web
Cong
)” on page 181
Printout Problems
Printout is Scued or Color is Missing
❏ If you have not used the printer for a long time, the print head nozzles may be clogged and ink drops may not
be discharged. Perform a nozzle check, and then clean the print head if any of the print head nozzles are
clogged.
❏ If you printed when the ink level was too low to be seen in the ink tank window, rell the ink tank to the upper
line and then use the Power Cleaning utility to replace the ink inside the ink tubes. Aer you use the utility,
perform a nozzle check to see if print quality has improved.
Related Information
&
“Check if Nozzles are Clogged (Nozzle Check)” on page 165
&
“
Relling
the Ink Tank” on page 160
&
“Power Cleaning the Print Head (Power Cleaning)” on page 169
User's Guide
Solving Problems
210