Operation Manual
Note:
If the ink does not start owing into the tank, remove the ink bottle and try reinserting it.
7. When the ink reaches the upper line, pull out the bottle.
Ink pours into the tank just by holding the bottle normally without squeezing. e ink ow stops
automatically when the ink is lled to the upper line.
c
Important:
Do not leave the ink bottle inserted; otherwise the bottle may be damaged or ink may leak.
8. Tighten the cap of the ink bottle.
Note:
If any ink remains in the ink bottle, tighten the cap and store the bottle upright for later use.
User's Guide
Relling Ink and Replacing Maintenance Boxes
162