ESC/VP21 Communication Manual Home ESC/VP21 Command User’s Guide for Home Projector 1 of 8
ESC/VP21 Communication Manual Home Table of Contents Introduction to ESC/VP21 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 ESC/VP21 Command Formats- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4 Applicable Models - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 Command Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 Appendix - - - - - - - - - - - - - - - - - - -
ESC/VP21 Communication Manual Home 1.Introduction to ESC/VP21 ESC/VP21 is a control command and protocol for Epson projectors, which is used for A/V controller to control and monitor Epson projectors. The command codes are comprised of ASCII codes. Therefore the command codes can be understood very easily and you can easily control projectors using a PC with a terminal emulator such as Microsoft Hyper terminal.
ESC/VP21 Communication Manual Home 2.ESC/VP21 Command Formats 2.1.Set command format A set command consists of a command and a parameter. Projector returns a colon after executing the command. There are two types of parameters. One is fixed such as ON, OFF, or 21.Other is a step parameter such as INC, DEC or INIT. INC increments the parameter by one. DEC decrements the parameter by one. INIT initializes the parameter.
ESC/VP21 Communication Manual Home 3.Applicable Models EMP-TW100 / TW100H / TS10 / -TW10 / -TW200 / -TW500 / -TW10H / TW200H /TW20 / TW600,520,550,800 / TW700 / TW1000 / TW2000 4.Command Table Item Power ON/OF ON OFF ON OFF Black Blue User Logo A/V Mute ON/OFF A/V Mute Screen Command PWR ON PWR OFF MUTE ON MUTE OFF MSEL 00 MSEL 01 MSEL 02 All Models O(*1) O O O O O O(*2) (*1)The "PWR ON" command for TW200 and TW200H needs to prepare for use. First step is to turn on the projector.
ESC/VP21 Communication Manual Home Item Terminal Signal name Command TW20 Source change INPUT 1/A Cyclic within “SOURCE 1x”.
ESC/VP21 Communication Manual Home 5.Appendix A projector and a computer can be connected using a serial or USB port. The projector can be remotely controlled by sending commands to the projector.. Serial Connection (TW100,TS10,TW10,TW200,TW500,TW10H,TW200H,TW20,TW600/520/550/800,TW700,TW1000,TW2000) • Select RS-232C at Advanced Setting of the Menu.
ESC/VP21 Communication Manual Home Revision History Revision Issued Date A Oct 19,2005 All pages First Release B Sep 29,2006 All pages Addition of TW700 C Mar 19,2007 All pages Addition of TW1000 D Jun 4,2007 E Dec 14,2007 Page Description 5.p Correction of “Applicable Model”.
