Specifications

Remedy:
Turn the scanner off and then back on.
Press the RESET button.
Send ESC @ codes to the scanner.
The INIT signal in the parallel interface
turns active.
The reset signal turns active in SCSI.
Complete BUS DEVICE RESET
message in the SCSI.
Acceptable commands: ESC F, ESC f, ESC @
OPTION Error (Available only when an option is installed and
enabled with ESC e)
Cause:
Indications:
An error related to the option is
detected, such as cover open, paper
jamming, etc.
ES-600C
READY LED blinks.
ERROR LED blinks.
Remedy:
This error condition is cleared when
the cause of the error is corrected.
Information Reference List
Engineering Change Notices
None
Product Support Bulletins
None
Technical Support Bulletins
None
Related Documentation
TM-ES600C
ES-600C Service Manual
PL-ES600C
ES-600C Parts Price List
SPKES600C
ES-600C Self Paced Kit
4001572
ES-600C User’s Guide
TM-B813021
Transparency Unit Service Manual
PL-B813021
Transparency Unit Parts Price List
SPKB813021
Transparency Unit Self Paced Kit
Scanners
11/2/92
ES-600C-5