User`s guide

Chapter 6:The Scanner Set-up Window
ScanShop User’s Guide - 51
select any of the presets available in the list. Common document sizes are listed
here.
To select an area to scan within the preview area, drag the rubber-band selection
box around the area you wish to scan. Alternatively, enter the x and y origins as
well as the desired scan width and height in the editable text fields provided for
these values. All dimensions can be entered and displayed in inches, millimeters
or pixels (pels).
Important Note: To enter origins and dimensions from the numeric keypad
on the keyboard, you must enable Number Lock on the keypad.
Image Size
The image size is displayed in bytes at the bottom right-hand corner of the scan
setup window. It changes dynamically as you change the scan area or modify the
dpi or bits-per-pixel resolution.
Preview
This button will initiate a preview scan. To produce the preview image, the
scanner makes a fast scan of the full scanning area at the lowest possible dpi and
Table 2:
Document
Name
Inches Millimeters
letter 8.5x11 216x297
legal 8.5x14 216x356
A3 11.7x16.5 297x420
A4 8.27x11.7 210x297
A5 5.82x8.27 148x210
B4 9.8x13.9 250x353
B5 6.9x9.8 176x250