User`s guide

Chapter 4:Starting Up ScanShop
26 - ScanShop User’s Guide
-scanarea=size
Set scan area to standard paper size. This is equivalent to specifying
values for
ulx, uly, width, and length for standard paper sizes. Note
that when
feeder or xfeed:yfeed values are specified, the scanarea
and ulx:uly:width:length values default to the same area as that of
the feeder.
-feeder=size
Enable automatic document feeding of page size. Default is 0 (off)
which disables the feeder and causes a flatbed scan. Values for the size
parameter are the same as for the
scanarea option above.
Table 2:
Size Dimensions
letter
8.5" x 11"
letterL
11" x 8.5"
legal
8.5" x 14"
11x17
11" x 17"
a2
420mm x 594mm
a3
297mm x 420mm
a3L
420mm x 297mm
a4
210mm x 297mm
a4L
297mm x 210mm
a5
148mm x 210mm
a5L
210mm x 148mm
b4
257mm x 364mm
b4L
364mm x 257mm
b5
182mm x 257mm
b5L
257mm x 182mm