User`s guide

Chapter 4:Starting Up ScanShop
ScanShop User’s Guide - 25
-mode=n
Scan images in mode n, depending on whether image composition is text
or photographs, etc. (use in conjunction with
bits option).
-bits=n
Scanner will return n bits per pixel (use in conjunction with mode
option).
-xres=n
Scan resolution (x direction) is n dots-per-inch. Default is 200.
-yres=n
Scan resolution (x direction) is n dots-per-inch. Default is 200.
-ulx=n
Define scan window, upper left corner, x offset, at n. A suffix of m, i, t,
or
p indicates units; otherwise twelfths, (1/1200 in), is assumed.
-uly=n
Define scan window upper left corner, y offset, at n. A suffix of m, i, t,
or
p indicates units, otherwise twelfths, (1/1200 in), is assumed.
-width=n
Scan window is n wide. A suffix of m, i, t, or p indicates units, otherwise
twelfths, (1/1200 in), is assumed.
-length=n
Scan window is n long. A suffix of m, i, t, or p indicates units, otherwise
twelfths, (1/1200 in), is assumed.
Table 1:
=n option Resulting Mode
0
binary
1
halftone
2
gray
3
color (special binary)
4
color (special halftone)
5
color