User`s guide

Chapter 3:Software and Hardware Installation

18 - ScanShop User’s Guide

Conﬁguring the Environment

Please see “# rm -r Vividata_directoryConﬁguring the EnvironmentEnvironment

Variables” on page 19 for details on setting up your environment.

Installation Complete

You are now ready to use ScanShop.

Demo Mode

If desired, you can verify your ScanShop installation before you get your license

key(s) from Vividata, by running ScanShop in “demo” mode. This is the default

mode if no license server can be found on your network, and it is identical to

running with licensing, except that only preview scans are permitted.

Removing ScanShop

Should it be necessary to remove ScanShop from your system, follow the

following procedures:

If you have a SunOS 4.x, HP-UX 10.x or AIX system...

You can remove the vvsc SCSI kernel driver using the uninstall script. After

switching to super-user mode, enter:

# cd scanshop_directory

# ./bin/vv_uninstall

From outside this directory, the software can then be removed by entering:

# rm -r Vividata_directory

# pkgrm VVvvsc

# pkgrm VVlicense

# pkgrm VVsshopmtTo remove the software, switch to super-user mode and

enter: