User manual

Page 75 of 79
13 Database batch status
If the scanning operator reports that a batch is no longer available for CD generation this is due the
fact that the status of this batch is such that it no longer appears in the list of batches available for
generation.
To correct this problem an operator with administration rights can correct or change the status of
affected batches by resetting the status back to - 1 - (Scanned).
The list indicating which error status can be set back to 1 can be configured in the Patentes.ini file
sub section [BATCHSTATUS]. In the example all batches have status 9, 32, 65 and 73 can be
modified to status 1. CurrentStatus means last status used.
[BATCHSTATUS]
CurrentStatus=9
Status1=9
Status2=32
Status3=65
Status4=73
To do this the administrator has to go to the ACCESS window and select Batch status
modification from the Database tab drop-down menu.
Figure 88: access window
The next window is displayed with the batches in status 9 (CurrentStatus). Another status can be
selected if the batches sought are not in the list.
Figure 89: batches with this status
Select one or more batches from Batches with this status and click on Add to place them in
Batches to be modified.